- sales@graecusnordic.com
- +45 89707089
The T500FL tracked dumper with front loader is designed for professional users who need to load, transport and unload materials with one compact machine.
It is particularly suitable for:
The combination of a front loader, 500 kg transport capacity and hydraulic high-tip body makes the T500FL particularly useful for repeated loading, transport and unloading tasks.
Contact Us to Order
Our sales team will assist you with
ordering, shipping
and any questions you may have.
Pay using Worldline Online Checkout
Sold and supported by Bredsgaard A/S – Danish supplier
Delivery across Europe · Consumer rights apply under EU law · Spare parts and after-sales service available
The T500FL tracked dumper with front loader combines loading, transport and hydraulic unloading in one compact machine.
Designed for professional material handling, the T500FL can load material with its front-mounted bucket, transport loads of up to 500 kg and hydraulically raise and tip the loading body for unloading.
The loading surface is positioned at approximately 800 mm and can be hydraulically raised to 1420 mm. The body can then be hydraulically tipped up to 90°, allowing material to be discharged at an elevated position.
This combination makes the T500FL a practical solution for construction, landscaping, agriculture, groundwork and other applications where materials need to be loaded and moved repeatedly.
A key difference between the T500FL and a conventional tracked dumper is the integrated front loader.
The loader allows the machine to pick up loose materials before transporting them in the dumper body.
This can reduce the need for a separate loading machine during smaller material-handling tasks and allows the operator to carry out several stages of the job with one machine.
The front loader bucket measures 350 × 660 × 200 mm according to the supplier information.
The T500FL features a hydraulically operated high-tip system designed to provide additional flexibility when unloading.
The loading surface starts at approximately 800 mm and can be hydraulically raised to a height of up to 1420 mm.
The body can also be hydraulically tipped through an angle of up to 90°.
This allows material to be discharged at a higher level than with a conventional low-tip dumper, making the T500FL useful where unloading height is important.
The rectangular body and flat discharge side are designed to support practical unloading of loose and bulky materials.
The T500FL is equipped with an improved gearbox providing:
Power is transferred through a Kevlar belt transmission.
This drive configuration gives the operator multiple speed options for transport and manoeuvring according to the working conditions.
The machine is powered by a 4-stroke petrol engine with manual start.
Detailed engine and performance data can be found under Technical Specifications.
The T500FL uses tracks manufactured from reinforced rubber.
An automatic track tensioning system helps maintain the correct track tension during operation.
The width and tread of the tracks are designed to provide traction and stability across different types of ground.
According to the supplier information, the machine can operate on inclines of up to 30% and has a loading and transport capacity of up to 500 kg.
Operating conditions, load distribution and the position of the loading system should always be considered when working on inclined terrain.
Independent clutch and disengagement controls are fitted to each side of the machine.
These controls allow the operator to change direction and assist with turning the machine within a confined working area.
This is particularly useful on construction sites, landscaping projects and other locations where working space may be limited.
The tracked undercarriage and independent steering controls give the T500FL good manoeuvrability for a machine combining loading and transport functions.
A folding operator platform is fitted to the rear of the machine for use during working and transport operations.
The controls are positioned to provide straightforward operation and precise machine control.
The combination of the operator platform, steering controls and loader functions allows the operator to control loading, transport and unloading from the machine.
The T500FL is built with a robust chassis manufactured from high-strength metal.
Reinforcing hollow sections underneath the chassis contribute to structural strength, while the chassis construction is designed to help reduce vibration and operating noise.
A 5 mm metal protection plate is installed underneath the machine to help protect the engine and transmission.
The engine and gearbox are positioned to provide practical access for cleaning and routine maintenance.
The T500FL includes a safety control system and automatic parking brake.
The supplier specifically notes that the machine can operate on inclined terrain, but the higher centre of gravity must be taken into account.
This is particularly important when the loading body is raised or when the machine is carrying material.
The operator should always consider:
The T500FL is supplied with EC conformity.
The main advantage of the T500FL is its ability to perform several material-handling operations with one compact tracked machine.
The front loader can be used to pick up material, the dumper body transports it, and the hydraulic high-tip system allows it to be discharged at the required location.
This can help professional users:
The T500FL tracked dumper with front loader can be used for material handling in applications such as:
The combination of tracked mobility, front loading and high-tip unloading makes the T500FL particularly relevant where loading and transport operations need to be carried out within a relatively compact working area.
A standard tracked dumper is primarily designed to transport and unload material.
The T500FL adds two important functions:
This makes the T500FL particularly suitable where the machine needs to participate in the complete material-handling process rather than transport alone.
For applications where a front loader or elevated tipping function is not required, a conventional tracked dumper may be the more appropriate solution.
Looking for a different capacity, configuration or transport solution?
Explore our range of dumpers for construction, landscaping, agriculture, maintenance and professional material handling.
Depending on the application, another model may provide a more suitable combination of:
Graecus Nordic works with Bredsgaard A/S to provide service and technical support for machinery sold through Graecus Nordic.
Contact us for assistance with:
Our team can assist both before and after delivery.
Looking for a tracked dumper with front loader for professional material handling?
Contact Graecus Nordic for information about the T500FL, including price, availability, delivery and technical guidance.
Phone: +45 89707089
E-mail: sales@graecusnordic.com
We reserve the right to correct errors or omissions in product descriptions and specifications.
Product specifications, equipment and configuration may change without prior notice.
Technical information should be confirmed before ordering where a specific specification or machine configuration is important.
| Model | T500FL |
|---|---|
| Engine | Loncin 270 cc petrol engine |
| Power | 9 HP |
| Weight | 446 kg |
| Overall dimensions | 2400 × 710 × 1240 mm |
| Transmission | 6 forward / 2 reverse |
| Tracks | 240/25/20 |
| Forward speed | 7.5 km/h |
| Reverse speed | 3.5 km/h |
| Payload capacity | 500 kg |
| Fuel consumption | 0.9 L/h |
| Body dimensions | 980 × 700 × 450 mm |
English (UK) English (UK) 
Dansk
Svenska
Norsk bokmål
